We Test.
We Prove It.
From copper cable certification to fiber OTDR testing and wireless site surveys — we use industry-leading instruments to verify that your infrastructure performs exactly as it should, and give you the documentation to prove it.
Certified with
Fluke DSX-5000
We certify every copper cable run to TIA-568 and ISO/IEC 11801 standards using the Fluke Networks DSX-5000 — the industry benchmark for cable certification. If it does not pass, we fix it.
Results are produced in Fluke LinkWare and delivered as professional certification reports — recognised by manufacturers for extended warranty programmes.
Category 5e
Legacy networks, VoIP, PoE devices
Category 6
Gigabit Ethernet, standard office environments
Category 6A
10-Gigabit, high-density data centres, hospitals
PoE / PoE+
IP cameras, wireless APs, access control systems
Wiremap & Continuity
Opens, shorts, split pairs, miswires
Patch Panels & Outlets
Full channel and permanent link testing
Standards-Certified Testing
Every cable run certified to TIA-568 and ISO/IEC 11801 before handover. You get a pass — or we fix it.
Precision Fault Diagnosis
Faults located to the centimetre — split pairs, shorts, impedance mismatches — not just flagged.
Full Certification Reports
Professional LinkWare documentation delivered with every project for compliance and warranty purposes.
Warranty-Grade Results
Results meet manufacturer criteria for extended cabling warranties — long-term protection for your investment.
End-to-End Accountability
We design, install, and certify. One team, from cable pull to report — no gaps in responsibility.
10-Gig Ready Verification
Insertion loss, NEXT, FEXT, and return loss measured across the full bandwidth to confirm 10GBase-T performance.
Need copper cabling certified?
We'll scope your project, run every test to standard, and hand over the full certification reports — ready for audit or warranty claim.
Tested with Fluke
OptiFiber Pro OTDR
We test and certify fiber optic infrastructure using the Fluke Networks OptiFiber Pro OTDR — producing detailed trace files that locate every fault, splice, and connector event along the entire fiber link.
From data centre backbone fiber to outside plant runs, we deliver bi-directional OTDR test results with full loss budgets — certified to TIA and ISO/IEC fiber standards and ready for 100G+ deployments.
OS2 Singlemode
Long-haul campus backbones, inter-building runs
OM3 / OM4 Multimode
10G / 40G data centre fiber, short-haul links
OM5 Wideband Multimode
100G+ data centre, SWDM applications
Splice & Connector Loss
Fusion splices, mechanical splices, LC/SC/MPO connectors
Outside Plant (OSP)
Underground, aerial, and direct-burial fiber routes
Data Centre Fiber
Structured fiber, trunk cables, MTP/MPO systems
OTDR Fault Location
We pinpoint breaks, bad splices, dirty connectors, and bends along the fiber — with exact distance and loss readings for each event.
Singlemode & Multimode
Full testing across OS1/OS2 singlemode and OM1–OM5 multimode fiber — covering data centres, campus backbones, and outside plant runs.
Bi-Directional Testing
We test in both directions and average the results — the correct method for accurate, standards-compliant loss measurements.
Connector End-Face Inspection
Every connector end-face is inspected to IEC 61300-3-35 standards before testing — because a dirty connector is the most common fiber failure.
High-Speed Fiber Certification
We certify fiber links to support 10G, 40G, 100G, and 400G Ethernet — meeting IEEE 802.3 loss budgets for your bandwidth requirements.
LinkWare Fiber Reports
Full OTDR trace files and pass/fail certification reports, delivered digitally — audit-ready and manufacturer warranty-eligible.
Need fiber optic testing or certification?
Whether it's a new installation, a fault investigation, or a pre-handover audit — we'll test your fiber, locate every issue, and deliver OTDR reports you can rely on.
Surveyed with
Ekahau Sidekick 2
We plan and validate wireless networks using the Ekahau Sidekick 2 — a dedicated tri-band Wi-Fi survey instrument supporting Wi-Fi 6 and Wi-Fi 6E across 2.4 GHz, 5 GHz, and 6 GHz.
Every survey produces heatmaps, channel plans, AP placement recommendations, and interference reports — so your wireless infrastructure is built on real data, not assumptions.
Office & Corporate Spaces
Dense deployments, roaming, VoIP over Wi-Fi
Warehouses & Logistics
High ceilings, RF-reflective environments, barcode scanners
Hospitals & Healthcare
Critical coverage, device roaming, compliance zones
Hotels & Hospitality
High client density, per-room coverage, guest isolation
Education Campuses
Multi-building, outdoor bridging, BYOD density
Retail & Public Spaces
POS systems, digital signage, customer Wi-Fi
Predictive & Physical Surveys
We design your Wi-Fi layout before anything is installed, then validate it with a live physical survey after deployment.
Wi-Fi 6 & 6E Coverage
Full tri-band analysis across 2.4 GHz, 5 GHz, and 6 GHz — ensuring your network is ready for the latest devices and standards.
Heatmap & Coverage Analysis
Visual signal strength heatmaps show exactly where coverage is strong, weak, or overlapping — eliminating guesswork in AP placement.
Interference & Spectrum Analysis
We identify sources of RF interference — neighbouring networks, microwaves, Bluetooth — and design around them.
Capacity Planning
We size your wireless infrastructure for real user density — not just coverage — so performance holds up under load.
Professional Survey Reports
Every survey delivers a detailed Ekahau report with heatmaps, AP placements, channel plans, and recommendations.
Need a professional Wi-Fi survey?
Poor Wi-Fi coverage costs more than a survey. We'll assess your space, design a network that performs under real load, and validate it with measured data.
Infrastructure You Can Trust.
Backed by Data.
Copper certification, fiber testing, or wireless design — we bring the right tools and the expertise to use them properly. Talk to our team about your project.
Get in Touch